Use glass reactor this way - safely and efficiently

Jacketed glass reactor design for the double-glazed inner layer into the reaction menstruum do stirring reaction, sandwich can pass on a variety of hot and cold sources (frozen liquid, hot water or hot oil) do loop heating or cooling reaction.

How to use glass reactors safely and efficiently

1、All glass pieces to be cleaned before installation.

2、Each standard port, milling mouth and sealing surfaces to be coated with a small amount of vacuum grease, increase the air tightness.

3、Before the installation, use, maintenance, inspection, be sure to familiarize themselves with the entire contents of the manual to use it right.

4、The supply voltage must be consistent with the provisions of this instrument.

5、No-load should not be high-speed operation.

6、The life of the electrical box and the ambient temperature, humidity. Please keep the governor and the motor dry.

7、Install the equipment of the reactor operation by professional operators using the device.

8、5 minutes off the power, do not touch the electrical parts, may still be due to the inverter or capacitor discharge electric shock.

9、Operation, pay attention to the the body hard objects (watches, rings, belt buckles, etc.) of glass crashing damages.

10、Connected vacuum tube pipe when we must be careful to avoid excessive force on the broken glass on the human body injury.

11、 High temperature cycle oil bath, pay attention to the damage of the high temperature of the human body, I recommend using a small damage to the human body's heat-conducting oil as a solvent. In particular, pay attention to the high-temperature cycle, should be open circulation pump, the thermal conductivity solvent cycle, gradually warming.

12、Installation is complete wheel locking bracket, to avoid moving.

13、Vacuum grease on the glass cock or feeding tube rotatable parts, please use silky and viscous materials.

14、Please send Gentle vacuum grease evenly thin smear on the spool, to cooperate fully with the grinding mouth.

15、Grinding mouth fastened or glued dead, then force it demolition caused by broken glass, very dangerous. Grinding mouth sticky death phenomenon, vacuum grease softening after removal methods (hot water, heating torch) curing.

The Professional Competence Behind the Lab, The Trusted Lab Instrument Partner for 120 Countries

NANBEI INSTRUMENT serves over one million customers worldwide, spanning university laboratories, corporate R&D centers, research institutes, quality inspection and commodity inspection agencies, industrial and agricultural sectors.